Electronics & Accessories
UniProbe Flow Switch
   -The UniProbe Flow Switch, Model UP01, is sensitive to the heat dissipation of a fluid. 
    The stainless steel probe houses temperature sensors and a heater element. 
    This combination monitors changes in heat transfer to the fluid. The rate of heat transfer 
    is proportional to the flow rate; therefore, a change from flow to no-flow is detected by the   
    amplifier and causes a relay to switch. The relay contacts may be connected to operate a 
    warning, shut down equipment, or control a process parameter. Flow switch applications 
    include pump shutdown, fan or blower alarms, leak detection and liquid level sensing.
   -The UniProbe Flow Switch is user-selectable for liquid or gas operation, and comes 
     factory-adjusted for  water or air over a fluid temperature range of -40° F to 185° F 
    (-40° C to 85° C). Other fluids may require minor adjustments which are readily 
    accomplished   onsite, and once set, the UniProbe provides totally maintenance-free   
    operation.
  

Electronics & Accessories
Smart Integral Linearizer (SIL)
   -The SIL (Smart Integral Linearizer), paired with a Flow Technology turbine flowmeter, is 
    a fully integrated, microprocessor-based flow sensing system that provides a linearized   
    output over the repeatable range of the flowmeter.
   -The SIL was designed to incorporate a temperature sensing unit into the electronic 
    enclosure. This enables corrections for viscosity and density changes due to 
    temperature variations without the need for external temperature sensors, signal 
    conditions or linearizers.